commit 4247fc915dacd437673444c55e2681ae5e343555 Author: Rudy Darmawan Kartono Date: Tue Jul 22 08:43:20 2025 +0700 Raspberry Vanilla IPMT diff --git a/android13/InstallKernelSU.sh b/android13/InstallKernelSU.sh new file mode 100755 index 0000000..f722cf5 --- /dev/null +++ b/android13/InstallKernelSU.sh @@ -0,0 +1,2 @@ +adb connect 192.168.10.46:5555 +adb install ./vendor/brcm/KernelSU/KernelSU.apk diff --git a/android13/build-all.sh b/android13/build-all.sh new file mode 100755 index 0000000..160bb7c --- /dev/null +++ b/android13/build-all.sh @@ -0,0 +1,6 @@ +./build-ipmt7.sh +./build-ipmt10.sh +./build-rackmount79.sh +./build-rackmount88.sh +./build-rackmount126.sh + diff --git a/android13/build-ipmt10.sh b/android13/build-ipmt10.sh new file mode 100755 index 0000000..eeacbff --- /dev/null +++ b/android13/build-ipmt10.sh @@ -0,0 +1,6 @@ +source build/envsetup.sh +export OUT_DIR=IPMT10 +lunch gtc_ipmt10-userdebug +make installclean +make bootimage systemimage vendorimage +./rpi4-mkimg.sh diff --git a/android13/build-ipmt35.sh b/android13/build-ipmt35.sh new file mode 100755 index 0000000..b9fb71a --- /dev/null +++ b/android13/build-ipmt35.sh @@ -0,0 +1,6 @@ +source build/envsetup.sh +export OUT_DIR=IPMT35 +lunch gtc_ipmt35-userdebug +make installclean +make bootimage systemimage vendorimage +./rpi4-mkimg.sh diff --git a/android13/build-ipmt5.sh b/android13/build-ipmt5.sh new file mode 100755 index 0000000..cfbd2ad --- /dev/null +++ b/android13/build-ipmt5.sh @@ -0,0 +1,6 @@ +source build/envsetup.sh +export OUT_DIR=IPMT5 +lunch gtc_ipmt5-userdebug +make installclean +make bootimage systemimage vendorimage +./rpi4-mkimg.sh diff --git a/android13/build-ipmt7.sh b/android13/build-ipmt7.sh new file mode 100755 index 0000000..626b909 --- /dev/null +++ b/android13/build-ipmt7.sh @@ -0,0 +1,6 @@ +source build/envsetup.sh +export OUT_DIR=IPMT7 +lunch gtc_ipmt7-userdebug +make installclean +make bootimage systemimage vendorimage +./rpi4-mkimg.sh diff --git a/android13/build-rackmount126.sh b/android13/build-rackmount126.sh new file mode 100755 index 0000000..a18dc29 --- /dev/null +++ b/android13/build-rackmount126.sh @@ -0,0 +1,6 @@ +source build/envsetup.sh +export OUT_DIR=RACKMOUNT126 +lunch gtc_rackmount126-userdebug +make installclean +make bootimage systemimage vendorimage +./rpi4-mkimg.sh diff --git a/android13/build-rackmount79.sh b/android13/build-rackmount79.sh new file mode 100755 index 0000000..a47126d --- /dev/null +++ b/android13/build-rackmount79.sh @@ -0,0 +1,6 @@ +source build/envsetup.sh +export OUT_DIR=RACKMOUNT79 +lunch gtc_rackmount79-userdebug +make installclean +make bootimage systemimage vendorimage +./rpi4-mkimg.sh diff --git a/android13/build-rackmount88.sh b/android13/build-rackmount88.sh new file mode 100755 index 0000000..9973838 --- /dev/null +++ b/android13/build-rackmount88.sh @@ -0,0 +1,6 @@ +source build/envsetup.sh +export OUT_DIR=RACKMOUNT88 +lunch gtc_rackmount88-userdebug +make installclean +make bootimage systemimage vendorimage +./rpi4-mkimg.sh diff --git a/android13/build-wallmount28.sh b/android13/build-wallmount28.sh new file mode 100755 index 0000000..2934e29 --- /dev/null +++ b/android13/build-wallmount28.sh @@ -0,0 +1,6 @@ +source build/envsetup.sh +export OUT_DIR=WALLMOUNT28 +lunch gtc_wallmount28-userdebug +make installclean +make bootimage systemimage vendorimage +./rpi4-mkimg.sh diff --git a/android13/device/brcm/rpi4-kernel/Image b/android13/device/brcm/rpi4-kernel/Image new file mode 100755 index 0000000..ac1c196 Binary files /dev/null and b/android13/device/brcm/rpi4-kernel/Image differ diff --git a/android13/device/brcm/rpi4-kernel/bcm2711-rpi-4-b.dtb b/android13/device/brcm/rpi4-kernel/bcm2711-rpi-4-b.dtb new file mode 100644 index 0000000..eb6ea49 Binary files /dev/null and b/android13/device/brcm/rpi4-kernel/bcm2711-rpi-4-b.dtb differ diff --git a/android13/device/brcm/rpi4-kernel/bcm2711-rpi-400.dtb b/android13/device/brcm/rpi4-kernel/bcm2711-rpi-400.dtb new file mode 100644 index 0000000..34cb4d2 Binary files /dev/null and b/android13/device/brcm/rpi4-kernel/bcm2711-rpi-400.dtb differ diff --git a/android13/device/brcm/rpi4-kernel/bcm2711-rpi-cm4.dtb b/android13/device/brcm/rpi4-kernel/bcm2711-rpi-cm4.dtb new file mode 100644 index 0000000..21ca6cc Binary files /dev/null and b/android13/device/brcm/rpi4-kernel/bcm2711-rpi-cm4.dtb differ diff --git a/android13/device/brcm/rpi4-kernel/bcm2711-rpi-cm4s.dtb b/android13/device/brcm/rpi4-kernel/bcm2711-rpi-cm4s.dtb new file mode 100644 index 0000000..065117f Binary files /dev/null and b/android13/device/brcm/rpi4-kernel/bcm2711-rpi-cm4s.dtb differ diff --git a/android13/device/brcm/rpi4-kernel/overlays/README b/android13/device/brcm/rpi4-kernel/overlays/README new file mode 100644 index 0000000..aef57c5 --- /dev/null +++ b/android13/device/brcm/rpi4-kernel/overlays/README @@ -0,0 +1,4647 @@ +Introduction +============ + +This directory contains Device Tree overlays. Device Tree makes it possible +to support many hardware configurations with a single kernel and without the +need to explicitly load or blacklist kernel modules. Note that this isn't a +"pure" Device Tree configuration (c.f. MACH_BCM2835) - some on-board devices +are still configured by the board support code, but the intention is to +eventually reach that goal. + +On Raspberry Pi, Device Tree usage is controlled from /boot/config.txt. By +default, the Raspberry Pi kernel boots with device tree enabled. You can +completely disable DT usage (for now) by adding: + + device_tree= + +to your config.txt, which should cause your Pi to revert to the old way of +doing things after a reboot. + +In /boot you will find a .dtb for each base platform. This describes the +hardware that is part of the Raspberry Pi board. The loader (start.elf and its +siblings) selects the .dtb file appropriate for the platform by name, and reads +it into memory. At this point, all of the optional interfaces (i2c, i2s, spi) +are disabled, but they can be enabled using Device Tree parameters: + + dtparam=i2c=on,i2s=on,spi=on + +However, this shouldn't be necessary in many use cases because loading an +overlay that requires one of those interfaces will cause it to be enabled +automatically, and it is advisable to only enable interfaces if they are +needed. + +Configuring additional, optional hardware is done using Device Tree overlays +(see below). + +GPIO numbering uses the hardware pin numbering scheme (aka BCM scheme) and +not the physical pin numbers. + +raspi-config +============ + +The Advanced Options section of the raspi-config utility can enable and disable +Device Tree use, as well as toggling the I2C and SPI interfaces. Note that it +is possible to both enable an interface and blacklist the driver, if for some +reason you should want to defer the loading. + +Modules +======= + +As well as describing the hardware, Device Tree also gives enough information +to allow suitable driver modules to be located and loaded, with the corollary +that unneeded modules are not loaded. As a result it should be possible to +remove lines from /etc/modules, and /etc/modprobe.d/raspi-blacklist.conf can +have its contents deleted (or commented out). + +Using Overlays +============== + +Overlays are loaded using the "dtoverlay" config.txt setting. As an example, +consider I2C Real Time Clock drivers. In the pre-DT world these would be loaded +by writing a magic string comprising a device identifier and an I2C address to +a special file in /sys/class/i2c-adapter, having first loaded the driver for +the I2C interface and the RTC device - something like this: + + modprobe i2c-bcm2835 + modprobe rtc-ds1307 + echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_device + +With DT enabled, this becomes a line in config.txt: + + dtoverlay=i2c-rtc,ds1307 + +This causes the file /boot/overlays/i2c-rtc.dtbo to be loaded and a "node" +describing the DS1307 I2C device to be added to the Device Tree for the Pi. By +default it usees address 0x68, but this can be modified with an additional DT +parameter: + + dtoverlay=i2c-rtc,ds1307,addr=0x68 + +Parameters usually have default values, although certain parameters are +mandatory. See the list of overlays below for a description of the parameters +and their defaults. + +Making new Overlays based on existing Overlays +============================================== + +Recent overlays have been designed in a more general way, so that they can be +adapted to hardware by changing their parameters. When you have additional +hardware with more than one device of a kind, you end up using the same overlay +multiple times with other parameters, e.g. + + # 2 CAN FD interfaces on spi but with different pins + dtoverlay=mcp251xfd,spi0-0,interrupt=25 + dtoverlay=mcp251xfd,spi0-1,interrupt=24 + + # a realtime clock on i2c + dtoverlay=i2c-rtc,pcf85063 + +While this approach does work, it requires knowledge about the hardware design. +It is more feasible to simplify things for the end user by providing a single +overlay as it is done the traditional way. + +A new overlay can be generated by using ovmerge utility. +https://github.com/raspberrypi/utils/blob/master/ovmerge/ovmerge + +To generate an overlay for the above configuration we pass the configuration +to ovmerge and add the -c flag. + + ovmerge -c mcp251xfd-overlay.dts,spi0-0,interrupt=25 \ + mcp251xfd-overlay.dts,spi0-1,interrupt=24 \ + i2c-rtc-overlay.dts,pcf85063 \ + >> merged-overlay.dts + +The -c option writes the command above as a comment into the overlay as +a marker that this overlay is generated and how it was generated. +After compiling the overlay it can be loaded in a single line. + + dtoverlay=merged + +It does the same as the original configuration but without parameters. + +The Overlay and Parameter Reference +=================================== + +N.B. When editing this file, please preserve the indentation levels to make it +simple to parse programmatically. NO HARD TABS. + + +Name: +Info: Configures the base Raspberry Pi hardware +Load: +Params: + ant1 Select antenna 1 (default). CM4 only. + + ant2 Select antenna 2. CM4 only. + + noant Disable both antennas. CM4 only. + + audio Set to "on" to enable the onboard ALSA audio + interface (default "off") + + axiperf Set to "on" to enable the AXI bus performance + monitors. + See /sys/kernel/debug/raspberrypi_axi_monitor + for the results. + + cam0_reg Enables CAM 0 regulator. + Only required on CM1 & 3. + + cam0_reg_gpio Set GPIO for CAM 0 regulator. + Default 31 on CM1, 3, and 4S. + Default of GPIO expander 5 on CM4, but override + switches to normal GPIO. + + cam1_reg Enables CAM 1 regulator. + Only required on CM1 & 3. + + cam1_reg_gpio Set GPIO for CAM 1 regulator. + Default 3 on CM1, 3, and 4S. + Default of GPIO expander 5 on CM4, but override + switches to normal GPIO. + + eee Enable Energy Efficient Ethernet support for + compatible devices (default "on"). See also + "tx_lpi_timer". Pi3B+ only. + + eth_downshift_after Set the number of auto-negotiation failures + after which the 1000Mbps modes are disabled. + Legal values are 2, 3, 4, 5 and 0, where + 0 means never downshift (default 2). Pi3B+ only. + + eth_led0 Set mode of LED0 - amber on Pi3B+ (default "1"), + green on Pi4 (default "0"). + The legal values are: + + Pi3B+ + + 0=link/activity 1=link1000/activity + 2=link100/activity 3=link10/activity + 4=link100/1000/activity 5=link10/1000/activity + 6=link10/100/activity 14=off 15=on + + Pi4 + + 0=Speed/Activity 1=Speed + 2=Flash activity 3=FDX + 4=Off 5=On + 6=Alt 7=Speed/Flash + 8=Link 9=Activity + + eth_led1 Set mode of LED1 - green on Pi3B+ (default "6"), + amber on Pi4 (default "8"). See eth_led0 for + legal values. + + eth_max_speed Set the maximum speed a link is allowed + to negotiate. Legal values are 10, 100 and + 1000 (default 1000). Pi3B+ only. + + hdmi Set to "off" to disable the HDMI interface + (default "on") + + i2c_arm Set to "on" to enable the ARM's i2c interface + (default "off") + + i2c_vc Set to "on" to enable the i2c interface + usually reserved for the VideoCore processor + (default "off") + + i2c An alias for i2c_arm + + i2c_arm_baudrate Set the baudrate of the ARM's i2c interface + (default "100000") + + i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface + (default "100000") + + i2c_baudrate An alias for i2c_arm_baudrate + + i2s Set to "on" to enable the i2s interface + (default "off") + + krnbt Set to "on" to enable autoprobing of Bluetooth + driver without need of hciattach/btattach + (default "off") + + krnbt_baudrate Set the baudrate of the PL011 UART when used + with krnbt=on + + pcie Set to "off" to disable the PCIe interface + (default "on") + (2711 only, but not applicable on CM4S) + N.B. USB-A ports on 4B are subsequently disabled + + spi Set to "on" to enable the spi interfaces + (default "off") + + spi_dma4 Use to enable 40-bit DMA on spi interfaces + (the assigned value doesn't matter) + (2711 only) + + random Set to "on" to enable the hardware random + number generator (default "on") + + sd Set to "off" to disable the SD card (or eMMC on + non-lite SKU of CM4). + (default "on") + + sd_overclock Clock (in MHz) to use when the MMC framework + requests 50MHz + + sd_poll_once Looks for a card once after booting. Useful + for network booting scenarios to avoid the + overhead of continuous polling. N.B. Using + this option restricts the system to using a + single card per boot (or none at all). + (default off) + + sd_force_pio Disable DMA support for SD driver (default off) + + sd_pio_limit Number of blocks above which to use DMA for + SD card (default 1) + + sd_debug Enable debug output from SD driver (default off) + + sdio_overclock Clock (in MHz) to use when the MMC framework + requests 50MHz for the SDIO/WLAN interface. + + tx_lpi_timer Set the delay in microseconds between going idle + and entering the low power state (default 600). + Requires EEE to be enabled - see "eee". + + uart0 Set to "off" to disable uart0 (default "on") + + uart1 Set to "on" or "off" to enable or disable uart1 + (default varies) + + watchdog Set to "on" to enable the hardware watchdog + (default "off") + + act_led_trigger Choose which activity the LED tracks. + Use "heartbeat" for a nice load indicator. + (default "mmc") + + act_led_activelow Set to "on" to invert the sense of the LED + (default "off") + N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led + overlay. + + act_led_gpio Set which GPIO to use for the activity LED + (in case you want to connect it to an external + device) + (default "16" on a non-Plus board, "47" on a + Plus or Pi 2) + N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led + overlay. + + pwr_led_trigger + pwr_led_activelow + pwr_led_gpio + As for act_led_*, but using the PWR LED. + Not available on Model A/B boards. + + N.B. It is recommended to only enable those interfaces that are needed. + Leaving all interfaces enabled can lead to unwanted behaviour (i2c_vc + interfering with Pi Camera, I2S and SPI hogging GPIO pins, etc.) + Note also that i2c, i2c_arm and i2c_vc are aliases for the physical + interfaces i2c0 and i2c1. Use of the numeric variants is still possible + but deprecated because the ARM/VC assignments differ between board + revisions. The same board-specific mapping applies to i2c_baudrate, + and the other i2c baudrate parameters. + + +Name: act-led +Info: Pi 3B, 3B+, 3A+ and 4B use a GPIO expander to drive the LEDs which can + only be accessed from the VPU. There is a special driver for this with a + separate DT node, which has the unfortunate consequence of breaking the + act_led_gpio and act_led_activelow dtparams. + This overlay changes the GPIO controller back to the standard one and + restores the dtparams. +Load: dtoverlay=act-led,= +Params: activelow Set to "on" to invert the sense of the LED + (default "off") + + gpio Set which GPIO to use for the activity LED + (in case you want to connect it to an external + device) + REQUIRED + + +Name: adafruit-st7735r +Info: Overlay for the SPI-connected Adafruit 1.8" 160x128 or 128x128 displays, + based on the ST7735R chip. + This overlay uses the newer DRM/KMS "Tiny" driver. +Load: dtoverlay=adafruit-st7735r,= +Params: 128x128 Select the 128x128 driver (default 160x128) + rotate Display rotation {0,90,180,270} (default 90) + speed SPI bus speed in Hz (default 4000000) + dc_pin GPIO pin for D/C (default 24) + reset_pin GPIO pin for RESET (default 25) + led_pin GPIO used to control backlight (default 18) + + +Name: adafruit18 +Info: Overlay for the SPI-connected Adafruit 1.8" display (based on the + ST7735R chip). It includes support for the "green tab" version. + This overlay uses the older fbtft driver. +Load: dtoverlay=adafruit18,= +Params: green Use the adafruit18_green variant. + rotate Display rotation {0,90,180,270} + speed SPI bus speed in Hz (default 4000000) + fps Display frame rate in Hz + bgr Enable BGR mode (default off) + debug Debug output level {0-7} + dc_pin GPIO pin for D/C (default 24) + reset_pin GPIO pin for RESET (default 25) + led_pin GPIO used to control backlight (default 18) + + +Name: adau1977-adc +Info: Overlay for activation of ADAU1977 ADC codec over I2C for control + and I2S for data. +Load: dtoverlay=adau1977-adc +Params: + + +Name: adau7002-simple +Info: Overlay for the activation of ADAU7002 stereo PDM to I2S converter. +Load: dtoverlay=adau7002-simple,= +Params: card-name Override the default, "adau7002", card name. + + +Name: ads1015 +Info: Overlay for activation of Texas Instruments ADS1015 ADC over I2C +Load: dtoverlay=ads1015,= +Params: addr I2C bus address of device. Set based on how the + addr pin is wired. (default=0x48 assumes addr + is pulled to GND) + cha_enable Enable virtual channel a. (default=true) + cha_cfg Set the configuration for virtual channel a. + (default=4 configures this channel for the + voltage at A0 with respect to GND) + cha_datarate Set the datarate (samples/sec) for this channel. + (default=4 sets 1600 sps) + cha_gain Set the gain of the Programmable Gain + Amplifier for this channel. (default=2 sets the + full scale of the channel to 2.048 Volts) + + Channel (ch) parameters can be set for each enabled channel. + A maximum of 4 channels can be enabled (letters a thru d). + For more information refer to the device datasheet at: + http://www.ti.com/lit/ds/symlink/ads1015.pdf + + +Name: ads1115 +Info: Texas Instruments ADS1115 ADC +Load: dtoverlay=ads1115,[=] +Params: addr I2C bus address of device. Set based on how the + addr pin is wired. (default=0x48 assumes addr + is pulled to GND) + cha_enable Enable virtual channel a. + cha_cfg Set the configuration for virtual channel a. + (default=4 configures this channel for the + voltage at A0 with respect to GND) + cha_datarate Set the datarate (samples/sec) for this channel. + (default=7 sets 860 sps) + cha_gain Set the gain of the Programmable Gain + Amplifier for this channel. (Default 1 sets the + full scale of the channel to 4.096 Volts) + + Channel parameters can be set for each enabled channel. + A maximum of 4 channels can be enabled (letters a thru d). + For more information refer to the device datasheet at: + http://www.ti.com/lit/ds/symlink/ads1115.pdf + + +Name: ads7846 +Info: ADS7846 Touch controller +Load: dtoverlay=ads7846,= +Params: cs SPI bus Chip Select (default 1) + speed SPI bus speed (default 2MHz, max 3.25MHz) + penirq GPIO used for PENIRQ. REQUIRED + penirq_pull Set GPIO pull (default 0=none, 2=pullup) + swapxy Swap x and y axis + xmin Minimum value on the X axis (default 0) + ymin Minimum value on the Y axis (default 0) + xmax Maximum value on the X axis (default 4095) + ymax Maximum value on the Y axis (default 4095) + pmin Minimum reported pressure value (default 0) + pmax Maximum reported pressure value (default 65535) + xohms Touchpanel sensitivity (X-plate resistance) + (default 400) + touchscreen-inverted-x Invert touchscreen X coordinates (default 0); + touchscreen-inverted-y Invert touchscreen Y coordinates (default 0); + touchscreen-swapped-x-y Swap X and Y cordinates (default 0); + + penirq is required and usually xohms (60-100) has to be set as well. + Apart from that, pmax (255) and swapxy are also common. + The rest of the calibration can be done with xinput-calibrator. + See: github.com/notro/fbtft/wiki/FBTFT-on-Raspian + Device Tree binding document: + www.kernel.org/doc/Documentation/devicetree/bindings/input/ads7846.txt + + +Name: adv7282m +Info: Analog Devices ADV7282M analogue video to CSI2 bridge. + Uses Unicam1, which is the standard camera connector on most Pi + variants. +Load: dtoverlay=adv7282m,= +Params: addr Overrides the I2C address (default 0x21) + media-controller Configure use of Media Controller API for + configuring the sensor (default off) + + +Name: adv728x-m +Info: Analog Devices ADV728[0|1|2]-M analogue video to CSI2 bridges. + This is a wrapper for adv7282m, and defaults to ADV7282M. +Load: dtoverlay=adv728x-m,= +Params: addr Overrides the I2C address (default 0x21) + adv7280m Select ADV7280-M. + adv7281m Select ADV7281-M. + adv7281ma Select ADV7281-MA. + media-controller Configure use of Media Controller API for + configuring the sensor (default off) + + +Name: akkordion-iqdacplus +Info: Configures the Digital Dreamtime Akkordion Music Player (based on the + OEM IQAudIO DAC+ or DAC Zero module). +Load: dtoverlay=akkordion-iqdacplus,= +Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec + Digital volume control. Enable with + dtoverlay=akkordion-iqdacplus,24db_digital_gain + (The default behaviour is that the Digital + volume control is limited to a maximum of + 0dB. ie. it can attenuate but not provide + gain. For most users, this will be desired + as it will prevent clipping. By appending + the 24db_digital_gain parameter, the Digital + volume control will allow up to 24dB of + gain. If this parameter is enabled, it is the + responsibility of the user to ensure that + the Digital volume control is set to a value + that does not result in clipping/distortion!) + + +Name: allo-boss-dac-pcm512x-audio +Info: Configures the Allo Boss DAC audio cards. +Load: dtoverlay=allo-boss-dac-pcm512x-audio, +Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec + Digital volume control. Enable with + "dtoverlay=allo-boss-dac-pcm512x-audio, + 24db_digital_gain" + (The default behaviour is that the Digital + volume control is limited to a maximum of + 0dB. ie. it can attenuate but not provide + gain. For most users, this will be desired + as it will prevent clipping. By appending + the 24db_digital_gain parameter, the Digital + volume control will allow up to 24dB of + gain. If this parameter is enabled, it is the + responsibility of the user to ensure that + the Digital volume control is set to a value + that does not result in clipping/distortion!) + slave Force Boss DAC into slave mode, using Pi a + master for bit clock and frame clock. Enable + with "dtoverlay=allo-boss-dac-pcm512x-audio, + slave" + + +Name: allo-boss2-dac-audio +Info: Configures the Allo Boss2 DAC audio card +Load: dtoverlay=allo-boss2-dac-audio +Params: + + +Name: allo-digione +Info: Configures the Allo Digione audio card +Load: dtoverlay=allo-digione +Params: + + +Name: allo-katana-dac-audio +Info: Configures the Allo Katana DAC audio card +Load: dtoverlay=allo-katana-dac-audio +Params: + + +Name: allo-piano-dac-pcm512x-audio +Info: Configures the Allo Piano DAC (2.0/2.1) audio cards. + (NB. This initial support is for 2.0 channel audio ONLY! ie. stereo. + The subwoofer outputs on the Piano 2.1 are not currently supported!) +Load: dtoverlay=allo-piano-dac-pcm512x-audio, +Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec + Digital volume control. + (The default behaviour is that the Digital + volume control is limited to a maximum of + 0dB. ie. it can attenuate but not provide + gain. For most users, this will be desired + as it will prevent clipping. By appending + the 24db_digital_gain parameter, the Digital + volume control will allow up to 24dB of + gain. If this parameter is enabled, it is the + responsibility of the user to ensure that + the Digital volume control is set to a value + that does not result in clipping/distortion!) + + +Name: allo-piano-dac-plus-pcm512x-audio +Info: Configures the Allo Piano DAC (2.1) audio cards. +Load: dtoverlay=allo-piano-dac-plus-pcm512x-audio, +Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec + Digital volume control. + (The default behaviour is that the Digital + volume control is limited to a maximum of + 0dB. ie. it can attenuate but not provide + gain. For most users, this will be desired + as it will prevent clipping. By appending + the 24db_digital_gain parameter, the Digital + volume control will allow up to 24dB of + gain. If this parameter is enabled, it is the + responsibility of the user to ensure that + the Digital volume control is set to a value + that does not result in clipping/distortion!) + glb_mclk This option is only with Kali board. If enabled, + MCLK for Kali is used and PLL is disabled for + better voice quality. (default Off) + + +Name: anyspi +Info: Universal device tree overlay for SPI devices + + Just specify the SPI address and device name ("compatible" property). + This overlay lacks any device-specific parameter support! + + For devices on spi1 or spi2, the interfaces should be enabled + with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. + + Examples: + 1. SPI NOR flash on spi0.1, maximum SPI clock frequency 45MHz: + dtoverlay=anyspi:spi0-1,dev="jedec,spi-nor",speed=45000000 + 2. MCP3204 ADC on spi1.2, maximum SPI clock frequency 500kHz: + dtoverlay=anyspi:spi1-2,dev="microchip,mcp3204" +Load: dtoverlay=anyspi,= +Params: spi- Configure device at spi, cs + (boolean, required) + dev Set device name to search compatible module + (string, required) + speed Set SPI clock frequency in Hz + (integer, optional, default 500000) + + +Name: apds9960 +Info: Configures the AVAGO APDS9960 digital proximity, ambient light, RGB and + gesture sensor +Load: dtoverlay=apds9960,= +Params: gpiopin GPIO used for INT (default 4) + noints Disable the interrupt GPIO line. + + +Name: applepi-dac +Info: Configures the Orchard Audio ApplePi-DAC audio card +Load: dtoverlay=applepi-dac +Params: + + +Name: arducam-64mp +Info: Arducam 64MP camera module. + Uses Unicam 1, which is the standard camera connector on most Pi + variants. +Load: dtoverlay=arducam-64mp,= +Params: rotation Mounting rotation of the camera sensor (0 or + 180, default 0) + orientation Sensor orientation (0 = front, 1 = rear, + 2 = external, default external) + media-controller Configure use of Media Controller API for + configuring the sensor (default on) + cam0 Adopt the default configuration for CAM0 on a + Compute Module (CSI0, i2c_vc, and cam0_reg). + + +Name: arducam-pivariety +Info: Arducam Pivariety camera module. + Uses Unicam 1, which is the standard camera connector on most Pi + variants. +Load: dtoverlay=arducam-pivariety,= +Params: rotation Mounting rotation of the camera sensor (0 or + 180, default 0) + orientation Sensor orientation (0 = front, 1 = rear, + 2 = external, default external) + media-controller Configure use of Media Controller API for + configuring the sensor (default on) + cam0 Adopt the default configuration for CAM0 on a + Compute Module (CSI0, i2c_vc, and cam0_reg). + + +Name: at86rf233 +Info: Configures the Atmel AT86RF233 802.15.4 low-power WPAN transceiver, + connected to spi0.0 +Load: dtoverlay=at86rf233,= +Params: interrupt GPIO used for INT (default 23) + reset GPIO used for Reset (default 24) + sleep GPIO used for Sleep (default 25) + speed SPI bus speed in Hz (default 3000000) + trim Fine tuning of the internal capacitance + arrays (0=+0pF, 15=+4.5pF, default 15) + + +Name: audioinjector-addons +Info: Configures the audioinjector.net audio add on soundcards +Load: dtoverlay=audioinjector-addons,= +Params: non-stop-clocks Keeps the clocks running even when the stream + is paused or stopped (default off) + + +Name: audioinjector-bare-i2s +Info: Configures the audioinjector.net audio bare i2s soundcard +Load: dtoverlay=audioinjector-bare-i2s +Params: + + +Name: audioinjector-isolated-soundcard +Info: Configures the audioinjector.net isolated soundcard +Load: dtoverlay=audioinjector-isolated-soundcard +Params: + + +Name: audioinjector-ultra +Info: Configures the audioinjector.net ultra soundcard +Load: dtoverlay=audioinjector-ultra +Params: + + +Name: audioinjector-wm8731-audio +Info: Configures the audioinjector.net audio add on soundcard +Load: dtoverlay=audioinjector-wm8731-audio +Params: + + +Name: audiosense-pi +Info: Configures the audiosense-pi add on soundcard + For more information refer to + https://gitlab.com/kakar0t/audiosense-pi +Load: dtoverlay=audiosense-pi +Params: + + +Name: audremap +Info: Switches PWM sound output to GPIOs on the 40-pin header +Load: dtoverlay=audremap,= +Params: swap_lr Reverse the channel allocation, which will also + swap the audio jack outputs (default off) + enable_jack Don't switch off the audio jack output. Does + nothing on BCM2711 (default off) + pins_12_13 Select GPIOs 12 & 13 (default) + pins_18_19 Select GPIOs 18 & 19 + pins_40_41 Select GPIOs 40 & 41 + pins_40_45 Select GPIOs 40 & 45 (don't use on BCM2711 - the + pins are on different controllers) + + +Name: balena-fin +Info: Overlay that enables WLAN, Bluetooth and the GPIO expander on the + balenaFin carrier board for the Raspberry Pi Compute Module 3/3+ Lite. +Load: dtoverlay=balena-fin +Params: + + +Name: bmp085_i2c-sensor +Info: This overlay is now deprecated - see i2c-sensor +Load: + + +Name: camera-mux-2port +Info: Configures a 2 port camera multiplexer + Note that currently ALL IMX290 modules share a common clock, therefore + all modules will need to have the same clock frequency. +Load: dtoverlay=camera-mux-2port,= +Params: cam0-imx219 Select IMX219 for camera on port 0 + cam0-imx258 Select IMX258 for camera on port 0 + cam0-imx290 Select IMX290 for camera on port 0 + cam0-imx477 Select IMX477 for camera on port 0 + cam0-imx708 Select IMX708 for camera on port 0 + cam0-ov2311 Select OV2311 for camera on port 0 + cam0-ov5647 Select OV5647 for camera on port 0 + cam0-ov7251 Select OV7251 for camera on port 0 + cam0-ov9281 Select OV9281 for camera on port 0 + cam0-imx290-clk-freq Set clock frequency for an IMX290 on port 0 + cam1-imx219 Select IMX219 for camera on port 1 + cam1-imx258 Select IMX258 for camera on port 1 + cam1-imx290 Select IMX290 for camera on port 1 + cam1-imx477 Select IMX477 for camera on port 1 + cam1-imx708 Select IMX708 for camera on port 1 + cam1-ov2311 Select OV2311 for camera on port 1 + cam1-ov5647 Select OV5647 for camera on port 1 + cam1-ov7251 Select OV7251 for camera on port 1 + cam1-ov9281 Select OV9281 for camera on port 1 + cam1-imx290-clk-freq Set clock frequency for an IMX290 on port 1 + + +Name: camera-mux-4port +Info: Configures a 4 port camera multiplexer + Note that currently ALL IMX290 modules share a common clock, therefore + all modules will need to have the same clock frequency. +Load: dtoverlay=camera-mux-4port,= +Params: cam0-imx219 Select IMX219 for camera on port 0 + cam0-imx258 Select IMX258 for camera on port 0 + cam0-imx290 Select IMX290 for camera on port 0 + cam0-imx477 Select IMX477 for camera on port 0 + cam0-imx708 Select IMX708 for camera on port 0 + cam0-ov2311 Select OV2311 for camera on port 0 + cam0-ov5647 Select OV5647 for camera on port 0 + cam0-ov7251 Select OV7251 for camera on port 0 + cam0-ov9281 Select OV9281 for camera on port 0 + cam0-imx290-clk-freq Set clock frequency for an IMX290 on port 0 + cam1-imx219 Select IMX219 for camera on port 1 + cam1-imx258 Select IMX258 for camera on port 1 + cam1-imx290 Select IMX290 for camera on port 1 + cam1-imx477 Select IMX477 for camera on port 1 + cam1-imx708 Select IMX708 for camera on port 1 + cam1-ov2311 Select OV2311 for camera on port 1 + cam1-ov5647 Select OV5647 for camera on port 1 + cam1-ov7251 Select OV7251 for camera on port 1 + cam1-ov9281 Select OV9281 for camera on port 1 + cam1-imx290-clk-freq Set clock frequency for an IMX290 on port 1 + cam2-imx219 Select IMX219 for camera on port 2 + cam2-imx258 Select IMX258 for camera on port 2 + cam2-imx290 Select IMX290 for camera on port 2 + cam2-imx477 Select IMX477 for camera on port 2 + cam2-imx708 Select IMX708 for camera on port 2 + cam2-ov2311 Select OV2311 for camera on port 2 + cam2-ov5647 Select OV5647 for camera on port 2 + cam2-ov7251 Select OV7251 for camera on port 2 + cam2-ov9281 Select OV9281 for camera on port 2 + cam2-imx290-clk-freq Set clock frequency for an IMX290 on port 2 + cam3-imx219 Select IMX219 for camera on port 3 + cam3-imx258 Select IMX258 for camera on port 3 + cam3-imx290 Select IMX290 for camera on port 3 + cam3-imx477 Select IMX477 for camera on port 3 + cam3-imx708 Select IMX708 for camera on port 3 + cam3-ov2311 Select OV2311 for camera on port 3 + cam3-ov5647 Select OV5647 for camera on port 3 + cam3-ov7251 Select OV7251 for camera on port 3 + cam3-ov9281 Select OV9281 for camera on port 3 + cam3-imx290-clk-freq Set clock frequency for an IMX290 on port 3 + + +Name: cap1106 +Info: Enables the ability to use the cap1106 touch sensor as a keyboard +Load: dtoverlay=cap1106,= +Params: int_pin GPIO pin for interrupt signal (default 23) + + +Name: chipdip-dac +Info: Configures Chip Dip audio cards. +Load: dtoverlay=chipdip-dac +Params: + + +Name: cirrus-wm5102 +Info: Configures the Cirrus Logic Audio Card +Load: dtoverlay=cirrus-wm5102 +Params: + + +Name: cm-swap-i2c0 +Info: Largely for Compute Modules 1&3 where the original instructions for + adding a camera used GPIOs 0&1 for CAM1 and 28&29 for CAM0, whilst all + other platforms use 28&29 (or 44&45) for CAM1. + The default assignment through using this overlay is for + i2c0 to use 28&29, and i2c10 (aka i2c_csi_dsi) to use 28&29, but the + overrides allow this to be changed. +Load: dtoverlay=cm-swap-i2c0,= +Params: i2c0-gpio0 Use GPIOs 0&1 for i2c0 + i2c0-gpio28 Use GPIOs 28&29 for i2c0 (default) + i2c0-gpio44 Use GPIOs 44&45 for i2c0 + i2c10-gpio0 Use GPIOs 0&1 for i2c0 (default) + i2c10-gpio28 Use GPIOs 28&29 for i2c0 + i2c10-gpio44 Use GPIOs 44&45 for i2c0 + + +Name: cma +Info: Set custom CMA sizes, only use if you know what you are doing, might + clash with other overlays like vc4-fkms-v3d and vc4-kms-v3d. +Load: dtoverlay=cma,= +Params: cma-512 CMA is 512MB (needs 1GB) + cma-448 CMA is 448MB (needs 1GB) + cma-384 CMA is 384MB (needs 1GB) + cma-320 CMA is 320MB (needs 1GB) + cma-256 CMA is 256MB (needs 1GB) + cma-192 CMA is 192MB (needs 1GB) + cma-128 CMA is 128MB + cma-96 CMA is 96MB + cma-64 CMA is 64MB + cma-size CMA size in bytes, 4MB aligned + cma-default Use upstream's default value + + +Name: crystalfontz-cfa050_pi_m +Info: Configures the Crystalfontz CFA050-PI-M series of Raspberry Pi CM4 + based modules using the CFA7201280A0_050Tx 7" TFT LCD displays, + with or without capacitive touch screen. + Requires use of vc4-kms-v3d. +Load: dtoverlay=crystalfontz-cfa050_pi_m,= +Params: captouch Enable capacitive touch display + + +Name: cutiepi-panel +Info: 8" TFT LCD display and touch panel used by cutiepi.io +Load: dtoverlay=cutiepi-panel +Params: + + +Name: dacberry400 +Info: Configures the dacberry400 add on soundcard +Load: dtoverlay=dacberry400 +Params: + + +Name: dht11 +Info: Overlay for the DHT11/DHT21/DHT22 humidity/temperature sensors + Also sometimes found with the part number(s) AM230x. +Load: dtoverlay=dht11,= +Params: gpiopin GPIO connected to the sensor's DATA output. + (default 4) + + +Name: dionaudio-kiwi +Info: Configures the Dion Audio KIWI STREAMER +Load: dtoverlay=dionaudio-kiwi +Params: + + +Name: dionaudio-loco +Info: Configures the Dion Audio LOCO DAC-AMP +Load: dtoverlay=dionaudio-loco +Params: + + +Name: dionaudio-loco-v2 +Info: Configures the Dion Audio LOCO-V2 DAC-AMP +Load: dtoverlay=dionaudio-loco-v2,= +Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec + Digital volume control. Enable with + "dtoverlay=hifiberry-dacplus,24db_digital_gain" + (The default behaviour is that the Digital + volume control is limited to a maximum of + 0dB. ie. it can attenuate but not provide + gain. For most users, this will be desired + as it will prevent clipping. By appending + the 24dB_digital_gain parameter, the Digital + volume control will allow up to 24dB of + gain. If this parameter is enabled, it is the + responsibility of the user to ensure that + the Digital volume control is set to a value + that does not result in clipping/distortion!) + + +Name: disable-bt +Info: Disable onboard Bluetooth on Pi 3B, 3B+, 3A+, 4B and Zero W, restoring + UART0/ttyAMA0 over GPIOs 14 & 15. + N.B. To disable the systemd service that initialises the modem so it + doesn't use the UART, use 'sudo systemctl disable hciuart'. +Load: dtoverlay=disable-bt +Params: + + +Name: disable-emmc2 +Info: Disable EMMC2 controller on BCM2711. + The allows the onboard EMMC storage on Compute Module 4 to be disabled + e.g. if a fault has occurred. +Load: dtoverlay=disable-emmc2 +Params: + + +Name: disable-wifi +Info: Disable onboard WLAN on Pi 3B, 3B+, 3A+, 4B and Zero W. +Load: dtoverlay=disable-wifi +Params: + + +Name: dpi18 +Info: Overlay for a generic 18-bit DPI display + This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output + 2-3 seconds after the kernel has started. +Load: dtoverlay=dpi18 +Params: + + +Name: dpi18cpadhi +Info: Overlay for a generic 18-bit DPI display (in 'mode 6' connection scheme) + This uses GPIOs 0-9,12-17,20-25 (so no I2C, uart etc.), and activates + the output 3-3 seconds after the kernel has started. +Load: dtoverlay=dpi18cpadhi +Params: + + +Name: dpi24 +Info: Overlay for a generic 24-bit DPI display + This uses GPIOs 0-27 (so no I2C, uart etc.), and activates the output + 2-3 seconds after the kernel has started. +Load: dtoverlay=dpi24 +Params: + + +Name: draws +Info: Configures the NW Digital Radio DRAWS Hat + + The board includes an ADC to measure various board values and also + provides two analog user inputs on the expansion header. The ADC + can be configured for various sample rates and gain values to adjust + the input range. Tables describing the two parameters follow. + + ADC Gain Values: + 0 = +/- 6.144V + 1 = +/- 4.096V + 2 = +/- 2.048V + 3 = +/- 1.024V + 4 = +/- 0.512V + 5 = +/- 0.256V + 6 = +/- 0.256V + 7 = +/- 0.256V + + ADC Datarate Values: + 0 = 128sps + 1 = 250sps + 2 = 490sps + 3 = 920sps + 4 = 1600sps (default) + 5 = 2400sps + 6 = 3300sps + 7 = 3300sps +Load: dtoverlay=draws,= +Params: draws_adc_ch4_gain Sets the full scale resolution of the ADCs + input voltage sensor (default 1) + + draws_adc_ch4_datarate Sets the datarate of the ADCs input voltage + sensor + + draws_adc_ch5_gain Sets the full scale resolution of the ADCs + 5V rail voltage sensor (default 1) + + draws_adc_ch5_datarate Sets the datarate of the ADCs 4V rail voltage + sensor + + draws_adc_ch6_gain Sets the full scale resolution of the ADCs + AIN2 input (default 2) + + draws_adc_ch6_datarate Sets the datarate of the ADCs AIN2 input + + draws_adc_ch7_gain Sets the full scale resolution of the ADCs + AIN3 input (default 2) + + draws_adc_ch7_datarate Sets the datarate of the ADCs AIN3 input + + alsaname Name of the ALSA audio device (default "draws") + + +Name: dwc-otg +Info: Selects the dwc_otg USB controller driver which has fiq support. This + is the default on all except the Pi Zero which defaults to dwc2. +Load: dtoverlay=dwc-otg +Params: + + +Name: dwc2 +Info: Selects the dwc2 USB controller driver +Load: dtoverlay=dwc2,= +Params: dr_mode Dual role mode: "host", "peripheral" or "otg" + + g-rx-fifo-size Size of rx fifo size in gadget mode + + g-np-tx-fifo-size Size of non-periodic tx fifo size in gadget + mode + + +[ The ds1307-rtc overlay has been deleted. See i2c-rtc. ] + + +Name: edt-ft5406 +Info: Overlay for the EDT FT5406 touchscreen on the CSI/DSI I2C interface. + This works with the Raspberry Pi 7" touchscreen when not being polled + by the firmware. + You MUST use either "disable_touchscreen=1" or "ignore_lcd=1" in + config.txt to stop the firmware polling the touchscreen. +Load: dtoverlay=edt-ft5406,= +Params: sizex Touchscreen size x (default 800) + sizey Touchscreen size y (default 480) + invx Touchscreen inverted x axis + invy Touchscreen inverted y axis + swapxy Touchscreen swapped x y axis + + +Name: enc28j60 +Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI0 +Load: dtoverlay=enc28j60,= +Params: int_pin GPIO used for INT (default 25) + + speed SPI bus speed (default 12000000) + + +Name: enc28j60-spi2 +Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI2 +Load: dtoverlay=enc28j60-spi2,= +Params: int_pin GPIO used for INT (default 39) + + speed SPI bus speed (default 12000000) + + +Name: exc3000 +Info: Enables I2C connected EETI EXC3000 multiple touch controller using + GPIO 4 (pin 7 on GPIO header) for interrupt. +Load: dtoverlay=exc3000,= +Params: interrupt GPIO used for interrupt (default 4) + sizex Touchscreen size x (default 4096) + sizey Touchscreen size y (default 4096) + invx Touchscreen inverted x axis + invy Touchscreen inverted y axis + swapxy Touchscreen swapped x y axis + + +Name: fbtft +Info: Overlay for SPI-connected displays using the fbtft drivers. + + This overlay seeks to replace the functionality provided by fbtft_device + which is now gone from the kernel. + + Most displays from fbtft_device have been ported over. + Example: + dtoverlay=fbtft,spi0-0,rpi-display,reset_pin=23,dc_pin=24,led_pin=18,rotate=270 + + It is also possible to specify the controller (this will use the default + init sequence in the driver). + Example: + dtoverlay=fbtft,spi0-0,ili9341,bgr,reset_pin=23,dc_pin=24,led_pin=18,rotate=270 + + For devices on spi1 or spi2, the interfaces should be enabled + with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. + + The following features of fbtft_device have not been ported over: + - parallel bus is not supported + - the init property which overrides the controller initialization + sequence is not supported as a parameter due to memory limitations in + the bootloader responsible for applying the overlay. + + See https://github.com/notro/fbtft/wiki/FBTFT-RPI-overlays for how to + create an overlay. + +Load: dtoverlay=fbtft,= +Params: + spi- Configure device at spi, cs + (boolean, required) + speed SPI bus speed in Hz (default 32000000) + cpha Shifted clock phase (CPHA) mode + cpol Inverse clock polarity (CPOL) mode + + adafruit18 Adafruit 1.8 + adafruit22 Adafruit 2.2 (old) + adafruit22a Adafruit 2.2 + adafruit28 Adafruit 2.8 + adafruit13m Adafruit 1.3 OLED + admatec_c-berry28 C-Berry28 + dogs102 EA DOGS102 + er_tftm050_2 ER-TFTM070-2 + er_tftm070_5 ER-TFTM070-5 + ew24ha0 EW24HA0 + ew24ha0_9bit EW24HA0 in 9-bit mode + freetronicsoled128 Freetronics OLED128 + hy28a HY28A + hy28b HY28B + itdb28_spi ITDB02-2.8 with SPI interface circuit + mi0283qt-2 Watterott MI0283QT-2 + mi0283qt-9a Watterott MI0283QT-9A + nokia3310 Nokia 3310 + nokia3310a Nokia 3310a + nokia5110 Nokia 5110 + piscreen PiScreen + pitft Adafruit PiTFT 2.8 + pioled ILSoft OLED + rpi-display Watterott rpi-display + sainsmart18 Sainsmart 1.8 + sainsmart32_spi Sainsmart 3.2 with SPI interfce circuit + tinylcd35 TinyLCD 3.5 + tm022hdh26 Tianma TM022HDH26 + tontec35_9481 Tontect 3.5 with ILI9481 controller + tontec35_9486 Tontect 3.5 with ILI9486 controller + waveshare32b Waveshare 3.2 + waveshare22 Waveshare 2.2 + + bd663474 BD663474 display controller + hx8340bn HX8340BN display controller + hx8347d HX8347D display controller + hx8353d HX8353D display controller + hx8357d HX8357D display controller + ili9163 ILI9163 display controller + ili9320 ILI9320 display controller + ili9325 ILI9325 display controller + ili9340 ILI9340 display controller + ili9341 ILI9341 display controller + ili9481 ILI9481 display controller + ili9486 ILI9486 display controller + pcd8544 PCD8544 display controller + ra8875 RA8875 display controller + s6d02a1 S6D02A1 display controller + s6d1121 S6D1121 display controller + seps525 SEPS525 display controller + sh1106 SH1106 display controller + ssd1289 SSD1289 display controller + ssd1305 SSD1305 display controller + ssd1306 SSD1306 display controller + ssd1325 SSD1325 display controller + ssd1331 SSD1331 display controller + ssd1351 SSD1351 display controller + st7735r ST7735R display controller + st7789v ST7789V display controller + tls8204 TLS8204 display controller + uc1611 UC1611 display controller + uc1701 UC1701 display controller + upd161704 UPD161704 display controller + + width Display width in pixels + height Display height in pixels + regwidth Display controller register width (default is + driver specific) + buswidth Display bus interface width (default 8) + debug Debug output level {0-7} + rotate Display rotation {0, 90, 180, 270} (counter + clockwise). Not supported by all drivers. + bgr Enable BGR mode (default off). Use if Red and + Blue are swapped. Not supported by all drivers. + fps Frames per second (default 30). In effect this + states how long the driver will wait after video + memory has been changed until display update + transfer is started. + txbuflen Length of the FBTFT transmit buffer + (default 4096) + startbyte Sets the Start byte used by fb_ili9320, + fb_ili9325 and fb_hx8347d. Common value is 0x70. + gamma String representation of Gamma Curve(s). Driver + specific. Not supported by all drivers. + reset_pin GPIO pin for RESET + dc_pin GPIO pin for D/C + led_pin GPIO pin for LED backlight + + +Name: fe-pi-audio +Info: Configures the Fe-Pi Audio Sound Card +Load: dtoverlay=fe-pi-audio +Params: + + +Name: fsm-demo +Info: A demonstration of the gpio-fsm driver. The GPIOs are chosen to work + nicely with a "traffic-light" display of red, amber and green LEDs on + GPIOs 7, 8 and 25 respectively. +Load: dtoverlay=fsm-demo,= +Params: fsm_debug Enable debug logging (default off) + + +Name: gc9a01 +Info: Enables GalaxyCore's GC9A01 single chip driver based displays on + SPI0 as fb1, using GPIOs DC=25, RST=27 and BL=18 (physical + GPIO header pins 22, 13 and 12 respectively) in addition to the + SPI0 pins DIN=10, CLK=11 and CS=8 (physical GPIO header pins 19, + 23 and 24 respectively). +Load: dtoverlay=gc9a01,= +Params: speed Display SPI bus speed + + rotate Display rotation {0,90,180,270} + + width Width of the display + + height Height of the display + + fps Delay between frame updates + + debug Debug output level {0-7} + + +Name: ghost-amp +Info: An overlay for the Ghost amplifier. +Load: dtoverlay=ghost-amp,= +Params: fsm_debug Enable debug logging of the GPIO FSM (default + off) + + +Name: goodix +Info: Enables I2C connected Goodix gt9271 multiple touch controller using + GPIOs 4 and 17 (pins 7 and 11 on GPIO header) for interrupt and reset. +Load: dtoverlay=goodix,= +Params: interrupt GPIO used for interrupt (default 4) + reset GPIO used for reset (default 17) + + +Name: googlevoicehat-soundcard +Info: Configures the Google voiceHAT soundcard +Load: dtoverlay=googlevoicehat-soundcard +Params: + + +Name: gpio-fan +Info: Configure a GPIO pin to control a cooling fan. +Load: dtoverlay=gpio-fan,= +Params: gpiopin GPIO used to control the fan (default 12) + temp Temperature at which the fan switches on, in + millicelcius (default 55000) + hyst Temperature delta (in millicelcius) below + temp at which the fan will drop to minrpm + (default 10000) + + +Name: gpio-hog +Info: Activate a "hog" for a GPIO - request that the kernel configures it as + an output, driven low or high as indicated by the presence or absence + of the active_low parameter. Note that a hogged GPIO is not available + to other drivers or for gpioset/gpioget. +Load: dtoverlay=gpio-hog,= +Params: gpio GPIO pin to hog (default 26) + active_low If set, the hog drives the GPIO low (defaults + to off - the GPIO is driven high) + + +Name: gpio-ir +Info: Use GPIO pin as rc-core style infrared receiver input. The rc-core- + based gpio_ir_recv driver maps received keys directly to a + /dev/input/event* device, all decoding is done by the kernel - LIRC is + not required! The key mapping and other decoding parameters can be + configured by "ir-keytable" tool. +Load: dtoverlay=gpio-ir,= +Params: gpio_pin Input pin number. Default is 18. + + gpio_pull Desired pull-up/down state (off, down, up) + Default is "up". + + invert "1" = invert the input (active-low signalling). + "0" = non-inverted input (active-high + signalling). Default is "1". + + rc-map-name Default rc keymap (can also be changed by + ir-keytable), defaults to "rc-rc6-mce" + + +Name: gpio-ir-tx +Info: Use GPIO pin as bit-banged infrared transmitter output. + This is an alternative to "pwm-ir-tx". gpio-ir-tx doesn't require + a PWM so it can be used together with onboard analog audio. +Load: dtoverlay=gpio-ir-tx,= +Params: gpio_pin Output GPIO (default 18) + + invert "1" = invert the output (make it active-low). + Default is "0" (active-high). + + +Name: gpio-key +Info: This is a generic overlay for activating GPIO keypresses using + the gpio-keys library and this dtoverlay. Multiple keys can be + set up using multiple calls to the overlay for configuring + additional buttons or joysticks. You can see available keycodes + at https://github.com/torvalds/linux/blob/v4.12/include/uapi/ + linux/input-event-codes.h#L64 +Load: dtoverlay=gpio-key,= +Params: gpio GPIO pin to trigger on (default 3) + active_low When this is 1 (active low), a falling + edge generates a key down event and a + rising edge generates a key up event. + When this is 0 (active high), this is + reversed. The default is 1 (active low) + gpio_pull Desired pull-up/down state (off, down, up) + Default is "up". Note that the default pin + (GPIO3) has an external pullup + label Set a label for the key + keycode Set the key code for the button + + + +Name: gpio-led +Info: This is a generic overlay for activating LEDs (or any other component) + by a GPIO pin. Multiple LEDs can be set up using multiple calls to the + overlay. While there are many existing methods to activate LEDs on the + RPi, this method offers some advantages: + 1) Does not require any userspace programs. + 2) LEDs can be connected to the kernel's led-trigger framework, + and drive the LED based on triggers such as cpu load, heartbeat, + kernel panic, key input, timers and others. + 3) LED can be tied to the input state of another GPIO pin. + 4) The LED is setup early during the kernel boot process (useful + for cpu/heartbeat/panic triggers). + + Typical electrical connection is: + RPI-GPIO.19 -> LED -> 300ohm resister -> RPI-GND + The GPIO pin number can be changed with the 'gpio=' parameter. + + To control an LED from userspace, write a 0 or 1 value: + echo 1 > /sys/class/leds/myled1/brightness + The 'myled1' name can be changed with the 'label=' parameter. + + To connect the LED to a kernel trigger from userspace: + echo cpu > /sys/class/leds/myled1/trigger + echo heartbeat > /sys/class/leds/myled1/trigger + echo none > /sys/class/leds/myled1/trigger + To connect the LED to GPIO.26 pin (physical pin 37): + echo gpio > /sys/class/leds/myled1/trigger + echo 26 > /sys/class/leds/myled1/gpio + Available triggers: + cat /sys/class/leds/myled1/trigger + + More information about the Linux kernel LED/Trigger system: + https://www.kernel.org/doc/Documentation/leds/leds-class.rst + https://www.kernel.org/doc/Documentation/leds/ledtrig-oneshot.rst +Load: dtoverlay=gpio-led,= +Params: gpio GPIO pin connected to the LED (default 19) + label The label for this LED. It will appear under + /sys/class/leds/